Free float type steam trap product introduction:
CS11H, CS41H free float steam trap is not affected by pressure, temperature, condensate flow fluctuation, continuous drainage, water immediately discharge, can make the heating equipment to achieve the best working efficiency. The product is the petroleum, chemical, printing and dyeing, pharmaceutical, paper, food and other industrial heating equipment the most ideal trap, especially the conditions of high requirements of the drum drying equipment, but also the most reliable performance of the automatic trap.
Free float steam trap working principle:
CS11H, CS41H free float type steam trap structure is simple, there is only one fine grinding stainless steel hollow float ball inside, both float and opening and closing parts, no vulnerable parts, long service life. When the device is just started, there is air and low-temperature condensate water in the pipeline, and the manual air exhaust valve can quickly remove non-condensing gas, and the trap begins to enter the working state. The low-temperature condensing water flows into the trap, the condensate level rises, the float rises, and the valve is opened. The device quickly raises the temperature, and the automatic air vent valve is closed before the temperature in the pipe rises to the saturation temperature. The device enters the normal operation condition, the condensate water decreases, the liquid level drops, and the float ball rises and falls with the liquid level to adjust the flow rate of the valve hole. When the condensate stops entering, the float approaches the valve seat with the flow of the medium and closes the valve. The seat of the free float steam trap is always below the liquid level to form a water seal without steam leakage.
Free float type steam trap features:
1, can expand saturated condensate, return the equipment does not contain water first accumulation, so as to obtain the highest heating efficiency.
2, when the steam pressure changes, it is not affected, and can work continuously and stably.
3, the leakage of steam is small, the use of advanced grinding technology manufacturing, float accuracy is high, good sealing performance.
4. Good automatic air exhaust performance.
5, long life, the whole sphere of the float ball can be made a sealing surface, no concentrated wear.
Specifications and technical parameters of free float steam trap:
☆ Nominal diameter (DN): 15-150;
☆ Nominal pressure (PN): 1.6-4.0Mpa
☆ Maximum working pressure (PMO) : 0.2-1.6Mpa
☆ Maximum working temperature (TMO) : 350 ºC
☆ Working medium: steam condensate;
☆ No load leakage rate is less than 3%; Subcooling 0.5%
Company Profile
Shanghai Xiaquan Valve Manufacturing Co., Ltd. (hereinafter referred to as "Xiaquan") is a professional manufacturer specializing in the research and development of valves for harsh conditions such as high temperature, high pressure, and ultra-low temperature. The company is headquartered in the Fengxian Industrial Zone and the Jiading Jinyuan Industrial Zone in Shanghai. With over 30 years of experience in the valve industry and a registered capital of 5 million yuan, the company has five subsidiaries. After years of hard work and development, it has become a key backbone enterprise in China's valve industry, focusing on enhancing the manufacturing and innovation capabilities of specialized valves for demanding industrial environments, and is committed to providing customers with a complete set of fluid control solutions. It is a large valve enterprise that integrates scientific research and development, testing and inspection, manufacturing, and sales.
The company covers an area of 80 acres, with a production workshop of 21,200 square meters and office space of 3,000 square meters, with a total investment of 120 million yuan. The company currently employs over 300 people, including more than 50 engineering and technical personnel, among which there are 12 senior titles and over 30 intermediate titles. It has a professional production workshop, a systematic large-scale CNC machining center, an automated horizontal machining center, large gantry lathes, fully automatic welding machines, and a complete assembly line operation platform. Currently, Xiaquan Valves is accelerating its intelligent transformation and upgrading, aiming to build a world-class valve factory and become an excellent valve enterprise and integrated supplier of solutions.
The company is dedicated to technological advancement, improving employee quality, optimizing resources, and implementing planned updates and renovations to ensure that various resources meet the needs of management, execution, and activities. The company focuses on enhancing resource assurance capabilities and long-term development planning in the following areas: 1. Timely supplementing and equipping technical and management personnel and operators, strengthening employees' quality awareness and professional skills through education and training, so that they understand our goal is high-quality products and customer satisfaction, and have the ability to achieve quality objectives. 2. Equipping or updating design, research and development, and manufacturing equipment, enriching and perfecting testing equipment and methods, and promoting the use of computers in design, production, testing, and business management.
The company's leading products include gate valves, stop valves, ball valves, butterfly valves, check valves, plug valves, balancing valves, steam traps, pressure reducing valves, regulating valves, and special valves. Based on conventional valve types, the company has introduced and developed over 200 series and more than 1,000 specifications of high-end special valves, including high-pressure hydrogen valves, anti-coking ball valves, high-temperature wear-resistant self-sealing gate valves, high-temperature blow-cleaning gate valves, high-temperature wear-resistant pipeline ball valves, ultra-low temperature valves, vacuum stop valves, emergency shut-off valves, and high-temperature high-pressure nuclear power valves.
The main materials of Xiaqian products include carbon steel, forged steel, stainless steel, chromium-molybdenum steel, low-temperature steel, duplex steel, Hastelloy C, Monel, and others. The standards adopted include national standards, American standards, German standards, British standards, and Japanese standards. The products cover industries such as petroleum, chemical engineering, electric power, natural gas, coal chemical, aerospace, metallurgy, and papermaking. The company has a complete standardized management system and employs world-class precision casting technology along with modern electronic testing systems. It utilizes advanced SAP resource management, bar code warehousing management systems, and ERP systems to manage the factory. From material selection to finished product delivery, the entire production process is organized using internationally advanced management models, achieving specialized, automated, and standardized production. The company insists on technological innovation as the leading force for its development, establishing a CAD valve design center, a three-dimensional simulation manufacturing design system, a valve testing center, and a testing platform to optimize product structure and ensure the quality and speed of new product research and development. Qizhongren firmly believes that the high-quality products bearing the responsibility and quality of Xiaqian valves will be found all over the world.
The company has been awarded over 20 honors, including membership in the Valve Branch of the China General Machinery Industry Association, membership in the China Petroleum and Chemical Equipment Industry Association, member unit of the China Electric Power Equipment Spare Parts Network, member of the China Engineering Construction Products Association, member of the China Urban Gas Association, member of the China Building Metal Structure Drainage Branch, recognized as a trustworthy unit in Shanghai for heavy contracts, a bank credit AAA-rated enterprise, and a national authority-certified quality qualified product. The company has won praise and trust from a wide range of domestic and international customers with its excellent product quality, complete variety, favorable prices, and comprehensive and prompt after-sales service. Adhering to the principle of "quality first, customer foremost," the company upholds the corporate spirit of "openness, innovation, service, excellence," and a market-centered business philosophy to provide the most comprehensive services to its customers. We welcome your company to visit and guide "Shanghai Xiaqian Valve Manufacturing Co., Ltd."
FAQ:
Q: Are you trading company or manufacturer ?
A: We are factory Located In ShangHai, China.
Q: What's your product range?
A: We produce Butterfly valve, Gate valve, Check valve, Y strainer ,Water Controlling Valve and other Pipe Accessories .
Q: What's Execution Standard?
A: ISO/ANSI/DIN/JIS/ EN/GOST/AS standard.
Q: What's your Strong product ?
A: Centre Line Butterfly valve, Eccentric Butterfly valve ,Resilient Seat Gate valve, and largest size to DN3200 .
Q: How long is your delivery time?
A: Generally it is 10 days if the goods are in stock. or it is 35 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=10000USD, 100% in advance. Payment>=10000USD, 30% T/T in advance ,balance before shipment.
){kind=link}